Dometic 10 Seriel RM 10.5 Notice D'utilisation page 22

Using the refrigerator
Please note the following special features when using stand-alone gas mode:
• The light inside the refrigerator remains switched off.
• The display turns off 2 seconds after the last activity.
• The display briefly switches on every 15 seconds. This indicates that the refriger-
ator is switched on.
• If there are error messages, the display stays switched on.
Stand-alone gas mode is indicated
• RM10.5T, RMS10.5T, RMS10.5XT: by the symbols
• RM10.5S, RMS10.5S, RMS10.5XS: by the flashing of
15 seconds
The batteries in the battery packs must be replaced
• RM10.5T, RMS10.5T, RMS10.5XT: when the error "E 14" is displayed
• RM10.5S, RMS10.5S, RMS10.5XS: when the error
6.9 Setting the cooling capacity
I
NOTE
For ambient temperatures of +15 °C to +25 °C, select the average cool-
ing capacity.
➤ Set the cooling capacity:
– RM10.5T, RMS10.5T, RMS10.5XT: Select the desired temperature level in
the cooling capacity menu.
– RM10.5S, RMS10.5S, RMS10.5XS: Repeatedly press
temperature level is selected.
6.10 Fan operation (optional)
For fan operation the optional fan must be installed.
When switching on the device, the fan is switched on for a short time (function test).
During the device's operation the fan only switches on:
• When the ambient temperature is above 32 °C.
• When the set cooling temperature is not reached within 2 hours.
• RM10.5T, RMS10.5T, RMS10.5XT: When the fan function is activated.
22
RM10.5(S)(T), RMS10.5(X)(S)(T)
and
LED every
/ is displayed
until the desired
EN