Matrx Back Installation - Invacare Matrx FSSH Manuel D'utilisation

TRD0238- Fixed Space Saver Hardware Installation, Rev 5.0 (Europe)_Layout 1 13/09/2012 11:07 AM Page 6

4.0 MaTRx Back Installation

Important! Prior to installation, ensure the left and right mounting plates
are secured to the back canes at the same height.
Important! To function effectively and provide proper support, all MaTRx
backs should be centered between the back canes.
The following section provides installation reference diagrams for the various MaTRx
back styles. Using the space saver hardware kit provided, determine the combination
of mounting hardware needed (i.e.; screws/spacers/washers) to properly center and
install the MaTRx back onto the mounting plates.
note: in order to achieve the proper set-up, the mounting hardware required may vary
slightly from the images shown.
4.1 MaTRx-PB and MaTRX-PB Deep
SPACE SAVER INSTALLATION* FOR THE MATRX-PB AND PB-DEEP
Please Note: the required mounting hardware may vary depending on the back size
and back cane width- images are provided for reference only.
6
spacer
MaTRx-PB
backpan