Converting Unit To Power Edger - Stihl FSE 60 Mode D'emploi

Mounting Depth Wheel on Support
2
B
C
A
3
1
Push the depth wheel (1) into the
N
required position on the support (2)
until the locking hooks (3) engage.
Squeeze the locking hooks (3) together
to release the depth wheel (1) from the
support (2).
Fitting Depth Wheel on Deflector
1
Push the depth wheel (1) with
N
support on to the deflector (4).
FSE 60, FSE 71, FSE 81
1
Secure the depth wheel (1) on the
N
deflector's (4) hook (6) with the
locking tab (5).
The depth wheel (1) can be released
from the hook (6) and pulled off the
deflector (4) by raising the locking
tab (5) slightly.
4
4
5
6
5
Converting Unit to Power
Edger
2
1
Loosen the screw (1).
N
Rotate the loop handle (2) 180°.
N
Tighten down the screw (1) firmly.
N
The trimmer can now be turned through
180° and used as a power edger (see
"Applications").
English
39