Controls - Siemens TE803 Série Mode D'emploi

Info: The factory settings of the fully auto-
matic espresso machine are p rogrammed for
optimal performance. The appliance switches
off automatically after a specific time (see
"Menu settings –
Auto Off after
Note: If the appliance is being used for the
first time, the service programme has been
run, or the appliance has not been operated
for a long period, the first beverage will
not have the full aroma and should not be
consumed.
When the fully automatic espresso machine
is first used, you will achieve a suitably thick
and stable "crema" only after the first few
cups have been dispensed.

Controls

Power on/off switch O / I
The power on/off switch 1 O / I is used
to switch the appliance on or off. The
appliance rinses automatically when it is
switched on and off.
The appliance will not rinse if:
■ it is still warm when switched on.
■ there was no coffee drawn before
s witching off.
The appliance is ready for use when the
symbols for the drink selection and the start
button 8 light up in the display 5.
Customising button
The appliance provides the option of s aving
and calling up customised settings for
coffee drinks. Please refer to the section
" C ustomising" for information on how to
save and call up these settings.
Service programmes button
à
Press the button 3 briefly to call up the
selection of service programmes. Please
run the programme as described in "Service
Programmes".
Press and hold to activate or deactivate the
child-proof lock, see "Child-proof lock".
").
á
à
Rotary knob
Turn the rotary knob 6 to the left or right to
navigate through the display 5, or to adjust
parameters in the menu.
Selection buttons
Press the selection buttons 4
navigate up and down through the menu
levels (navigation line 5c).
Display
The display 5 uses symbols to indicate
the selection options, coffee strength and
per-cup quantity, and uses text to indicate
settings, ongoing processes and messages.
The rotary knob 6 and selection buttons 4
can be used to change settings.
The selected setting is highlighted by a
frame.
Espresso
 à À Á Å Æ
Example:
The status line 5a shows the name of the
type of drink, along with the strength setting
55
and per-cup quantity
The selection line 5b shows symbols for
drink selection.
The arrows in the navigation line 5c indicate
the direction in which more menu levels can
be found.
Please refer to "Displays" for more detailed
information.
Start button
Press the start button 8 to begin drink
preparation or to start a service programme.
Press the start button 8 again during drink
preparation to stop the dispensing process
prematurely.
Controls
< >
and
< >
and
ËË Í
5a
5b
5c
.
Î
en
to
7