Operation; Energy Saving Tips - Dometic COOLMATIC CD 20 Instructions De Montage Et De Service

Operation

7 Operation
I
NOTE
Before starting your new cooling device for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and care" on page 14).
7.1

Energy saving tips

• Choose a well ventilated installation location which is protected against direct
sunlight.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
• Defrost your cooling device as soon as a layer of ice forms.
• Avoid unnecessarily low temperatures.
• Clean the condenser of dirt (dust etc.) at regular intervals.
7.2 Switching on the coolbox
➤ Open the coolbox drawer.
➤ To switch on the coolbox, turn the thermostat knob clockwise
(see fig. 3 1, page 4).
✓ The coolbox starts cooling the interior.
I
NOTE
Ensure that the objects placed in the coolbox are suitable for
cooling/warming to the selected temperature.
12
CD20, CD30
EN