Setting The Date And Time; The Call List - Topcom Butler 3011 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Butler 3011/3011C
oldest calls in the memory. The symbol
answered. If the Call List is empty and you press the Up key
You can view the information of an incoming call as follows:
Press the Up key
memory) of the caller, the sequence number of the call in the Call List, the date and time
of the call appear on the display.
Press the Down key

5.1. SETTING THE DATE AND TIME

When you receive an incoming call and the date and time are not sent together with the
telephone number, this means that the date and the time will not be shown on the display. By
setting the date and time, they will be shown on the display, together with the telephone
number, every time a call comes in !
Press the Programming key
Press the Up or Down key
Press the Programming key
'DATE/TIME' appears on the display.
Press the Programming key
When 'YEAR' appears on the display, enter the 2 last numbers of the year (00=2000,
01=2001, ...) and press the Programming key
When 'MONTH' appears on the display, enter the month (01=January, 02=February, ...)
and press the Programming key
When 'DAY' appears on the display, enter the day of the month and press the
Programming key to confirm.
When 'HOUR' appears on the display, enter the current hour (in 24h format) and press
the Programming key
When 'MINUTES' appears on the display, enter the minutes and press the Programming
key
to confirm.
The date and time are now set !

5.2 THE CALL LIST

The calls received are stored in the Call List (max. 30 numbers).
Briefly press the Up key
The name of the most recent caller appears on the display. If no name is available, 'NO
NAME' appears on the display.
If it is a private number, 'UNAVAL' appears on the display.
The date and time the call was received are linked to each call.
Briefly press the Down key
Briefly press the Down key
Notes :
If neither the Up or Down key
to standby mode.
After a call is received, the number of the caller remains on the display for 15 seconds
after the last ring.
Caller ID is not available while you are on the line.
Butler 3011/3011C
on the display blinks if the call is not read or not
. The name (if sent by the network or present in the Phone Book
. The telephone number of the caller appears on the display.
.
a few times until 'SETTING' appears on the display.
.
again.
to confirm.
to confirm.
to view the most recent call.
to view the telephone number of the call.
to browse other numbers on the list.
is pressed for 15 seconds, the telephone will return
, three beep tones will sound.
to confirm.
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Butler 3011c

Table des Matières