Starting Operation - Bosch PSR 200 LI Instructions D'emploi

OBJ_DOKU-1495-002.fm Page 28 Thursday, December 14, 2006 2:56 PM
Disconnect the battery charger from the mains supply when not
using it for longer periods.
Protect the battery charger against moisture!
Observe the notes for disposal.
Changing the Tool (see figure B)
Do not use double-sided screwdriver blades that are
longer than 25 mm.
Insert the screwdriver bit 1 directly into the tool holder 2.
Operation

Starting Operation

Reversing the Rotational Direction
The rotational direction switch 9 is used to reverse the rotational
direction of the machine. However, this is not possible with the
On/Off switch 8 actuated.
Right rotation: For driving in screws, push the rotational direc-
tion switch 9 left to the stop.
The indicator for right rotation 3 lights up when the On/Off
switch 8 is actuated and the motor is running.
Left Rotation: For loosening or unscrewing screws, push the
rotational direction switch 9 right to the stop.
The indicator for left rotation 5 lights up when the On/Off
switch 8 is actuated and the motor is running.
Setting the Torque
With the thumbwheel for torque preselection 6, the required
torque can be preselected in 6 steps. The inserted tool is stopped
as soon as the set torque is reached.
28 | English
2 609 001 148 • 14.12.06