Yamaha AW2400 Mode D'emploi page 275

5.13.1.4. MMC FAST FORWARD
< Transmission >
This message is transmitted with a device number of 7F when the FF
key is pressed and the Cue mode is engaged.
< Reception >
If the AW2400 is operating as an MMC Slave, the transport will
begin fast-forward when this message is received with a matching
device number or a device number of 7F.
System Exclusive Message
STATUS 11110000 F0
Real Time System Exclusive
ID No. 01111111 7F
Destination (00-7E, 7F:all call)
Device ID 0ddddddd dd
Machine Control Command (mcc) sub-id
Command 00000110 06
Fast Forward (MCS)
00000110 04
End Of Exclusive
EOX 11110111 F7
5.13.1.5. MMC REWIND
< Transmission >
This message is transmitted with a device number of 7F when the
REWIND key is pressed and the Review mode is engaged.
< Reception >
If the AW2400 is operating as an MMC Slave, the transport will
begin rewind when this message is received with a matching device
number or a device number of 7F.
System Exclusive Message
STATUS 11110000 F0
Real Time System Exclusive
ID No. 01111111 7F
Destination (00-7E, 7F:all call)
Device ID 0ddddddd dd
Machine Control Command (mcc) sub-id
Command 00000110 06
Rewind (MCS)
00000101 05
End Of Exclusive
EOX 11110111 F7
5.13.1.6. MMC RECORD STROBE
< Reception >
This message is received if the AW2400 is operating as an MMC
Slave and the device number matches or is 7F. If the transport is
stopped, then recording will begin. If the transport is playing, then
punch-in will occur.
System Exclusive Message
STATUS 11110000 F0
Real Time System Exclusive
ID No. 01111111 7F
Destination (00-7E, 7F:all call)
Device ID 0ddddddd dd
Machine Control Command (mcc) sub-id
Command 00000110 06
Record strobe
00000110 06
End Of Exclusive
EOX 11110111 F7
5.13.1.7. MMC RECORD EXIT
< Reception >
This message is received if the AW2400 is operating as an MMC
Slave and the device number matches or is 7F. If the transport is
recording, then punch-out will occur.
System Exclusive Message
STATUS 11110000 F0
Real Time System Exclusive
ID No. 01111111 7F
Destination (00-7E, 7F:all call)
Device ID 0ddddddd dd
Machine Control Command (mcc) sub-id
Command 00000110 06
Record Exit
00000111 07
End Of Exclusive
EOX 11110111 F7
5.13.1.8. MMC RESET
< Transmission >
This message is transmitted with a device number of 7F when song
loading is finished.
< Reception >
This message is received if the AW2400 is operating as an MMC
Slave and the device number matches or is 7F. MMC-related internal
settings will be reset to the power-on state.
System Exclusive Message
STATUS 11110000 F0
Real Time System Exclusive
ID No. 01111111 7F
Destination (00-7E, 7F:all call)
Device ID 0ddddddd dd
Machine Control Command (mcc) sub-id
Command 00000110 06
Reset
00001101 0D
End Of Exclusive
EOX 11110111 F7
5.13.1.9. MMC LOCATE (TARGET)
< Transmission >
This message is transmitted with a device number of 7F when a
locate-related key such as MARK SEARCH/IN/OUT is pressed,
a FF/REW operation is performed, when the transport returns to the
auto-punch pre-roll point, or when repeating.
< Reception >
This message is received if the AW2400 is operating as an MMC
Slave and the device number matches. The transport will locate to the
time code position specified within the command data.
System Exclusive Message
STATUS 11110000 F0
Real Time System Exclusive
ID No. 01111111 7F
Destination (00-7E, 7F:all call)
Device ID 0ddddddd dd
Machine Control Command (mcc) sub-id
Command 00000110 06
Locate
01000100 44
00000110 06 byte count
00000001 01 "target" sub command
0hhhhhhh hh hour (Standard Time Code)
minute
0mmmmmmm mm
second
0sssssss ss
frame
0fffffff ff
sub-frame
0sssssss ss
End Of Exclusive
EOX 11110111 F7
Mode d'emploi de l'AW2400
Format des données MIDI
275