Maintenance; Customer Service / Support; De-Commissioning; Drawings And Replacement Parts - ABNOX AXFP 1 Série Instructions De Service

Maintenance

The indicated maintenance intervals are based on
single-shift operation. Depending on the use site, me-
dium and cases of multi-shift operation, maintenance
may need to be performed more frequently.
WHEN WHAT
During every Check for
drum damage to
changeover the follower
plate
Weekly Check all
hoses and
fittings for
leaks
Weekly Safety
coupling
CAUTION
All work on the plant absolutely must
be done when it is idle.
The pneumatic and hydraulic
systems must be de-pressurised.
The manometers must show 0 bar.

Customer Service / Support

ABNOX AG
Langackerstrasse 25
CH-6330 Cham
Switzerland
Tel. +41 (0) 41 780 44 55
Fax +41 (0) 41 780 44 50
E-Mail info@abnox.com
Internet www.abnox.com
HOW WHO
Visual Operating
company
technici-
ans
Visual Operating
company
technici-
ans
Check Operating
for fit company
and technici-
leaks ans

De-Commissioning

Brief Interruptions:
In the event of short interruptions (overnight or just
over the weekend), shut down the product. The
system must be de-pressurised.
Long-Term Interruptions:
In the event of a longer-term interruption (more than
three days), the following points should be observed:
• The main switch must be shut down
• The system must be de-pressurised (check the
displays)
CAUTION
Risk of accident and danger to the
environment:
Grease / oil on the ground increase
the risk of accident.
The grease/oil must be properly
disposed of in compliance with
applicable national ordinances
(hazardous waste).

Drawings and Replacement Parts

Accessories, drawings, dimensioning sheets, data
sheets and replacement parts can be found at
www.abnox.com.

Expansion options

Audible empty signal L (Figure D/no. 15)
Audible signal when the grease is used up. The signal
is silenced by pressing the alarm button (Figure D/
no. 15).
EN
25