Connections, Operating And Display Elements - Cameo CL 200 Manuel D'utilisation

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS

1
POWER IN
Blue power input socket for power supply to the device. A suitable power cable is included.
2
POWER OUT
White power output socket for the power supply of additional CAMEO spotlights. Ensure that the total current consumption of all connected
devices does not exceed the value specified on the device in amperes (A).
3
FUSE
Fuse holder. Fuse F3AL/250 V (5 x 20 mm). IMPORTANT: Replace the fuse only with a fuse of the same type and value. In the event of repeated
fuse failure, please contact an authorised service centre.
4
DMX IN
Male 3-pin XLR socket for connection to a DMX control device (e.g. DMX console).
5
DMX OUT
Female 3-pin XLR socket for sending the DMX control signal.
6
LC DISPLAY
The illuminated LC display shows the operating mode and other system information.
7
OPERATING KEYS
MODE – press MODE to access the selection menu for system settings. Press repeatedly to return to the main display. ENTER – press
ENTER to access the menu levels so as to be able to change settings and access the sub-menus. Confirm changed settings by pressing
ENTER. UP and DOWN – select individual menu items in the selection menu (DMX address, operating mode etc.) and in the sub-menus.
Allow changes to be made to a menu item setting such as the DMX address as required.
8
EYELET FOR SECURING CABLE
Overhead installation may only be carried out by qualified personnel. A suitable safety cable must be fitted to the spotlight's securing lug to
ensure that it does not fall down.
4
1
5
6
7
3
2
8
5