Mounting And Installation - Siemens PolyCool Superheat - CPS40 Manuel D'installation Et D'utilisation

A Mounting on DIN rail
B Wall mounting
C Flush panel mounting
Recommendation!
Siemens
Building Technologies
3.1

Mounting and installation

Controller
No further parts are needed.
With four ellipse screws for holes with diameter of
4 mm x 6 mm
With HVAC Products ARG462.10 mounting kit
Mounting instruction M 3351.1
Electronic injection valve (EIV)
DC 0-10 V
MVL661...
In order to prevent expansion valve from freezing during off
period (pump – down) it is required to install the valve above the
evaporator. This is especially important with plate heat ex-
changers.
Superheat - CPS40
System components
RWR 62. 4 10
³
5 cm
2m/6.5 ft
QBE 9103 -P10U
3371S06
QAZ21.682/101
29 / 120
CE1U3372xx
2018-11-09