JVC KD-X340BTS Manuel D'instructions page 20

BLUETOOTH®
To
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Reject another incoming
call
While having two active calls...
End current call and
activate held call
Swap between the current
call and held call
Adjust the phone volume * 1
[00] to [35] (Default: [15])
Switch between hands-free
and private talk modes *
2
* 1
This adjustment will not affect the volume of the other sources.
* 2
Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone....
1 Press and hold .
2 Turn the volume knob to select an item (see the following table), then press
the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press to exit.
To return to the previous setting item, press
16
ENGLISH
On the faceplate On the remote control
Press or the volume
( Not available )
knob.
Press and hold or
( Not available )
the volume knob.
Press and hold
Press and hold or
the volume knob.
Press .
( Not available )
Turn the volume knob
( Not available )
during a call.
Press during a call.
( Not available )
.
MIC GAIN LEVEL –10 to LEVEL +10 (LEVEL –04): The sensitivity of the
microphone increases as the number increased.
NR LEVEL LEVEL –05 to LEVEL+05 (LEVEL 00): Adjust the noise
reduction level until the least noise is being heard during a
phone conversation.
ECHO CANCEL LEVEL –05 to LEVEL +05 (LEVEL 00): Adjust the echo
cancellation delay time until the least echo is being heard
during a phone conversation.
Make the settings for receiving a call
.
1
Press to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the following
table), then press the knob.
3 2
Repeat step
activated.
To return to the previous setting item, press
SETTINGS
AUTO ANSWER 01 SEC to 30 SEC: The unit answers incoming call
automatically in the selected time (in seconds). ; OFF: Cancels.
RING COLOR KD-X340BTS:
COLOR 01 to COLOR 49 (COLOR 08): Selects the illumination
color for the buttons as notification when there is an incoming
call and during a call. ; OFF: Cancels.
RING ILLUMI KD-X240BT:
BLINK 01 to BLINK 05 (BLINK 02): Selects the blinking
pattern for the buttons as notification when there is an
incoming call. ; OFF: Cancels.
until the desired item is selected or
Default: XX
.
Default: XX