Bosch TES 501 Série Mode D'emploi page 14

en
Setting the brewing temperature
The brewing temperature can also be set.
1� Turn the rotary
knob (13) to position
2� Press and hold buttons
A
(12) for at least 5 seconds. The set
brewing temperature is indicated by the
number of LEDs that now light up.
3� Now press the start button (10) repeat-
edly until the required number of LEDs
light up to indicate the temperature:
D
LED = low
D E
LED and = medium
D E
LED , and
4. Press and hold the start button (10) for
at least 5 seconds. The set number of
LEDs will light up to indicate that the
selected temperature has been saved
successfully.
Note: If no button is pressed within
90 s econds, the appliance switches to
stand-by mode without saving the new
s ettings. In this case, the previously saved
brewing temperature setting is retained.
10
B
(11) and
F
= high
Adjusting the grind settings
The selector (3) for grind setting adjusts the
grind settings from coarse to fine.
¡
Warning!
Adjust the grinding unit only while it is
r u nning! Otherwise the appliance may be
damaged. Do not reach into the grinding
unit.
● With the grinding unit running, adjust the
selector (3) from fine (a: turn anticlock-
wise) to coarse (b: turn clockwise).
a
Information: The effects of the new grind
setting will not become apparent until after
the second cup of coffee.
Tip: Choose a finer grind for dark roasted
beans and a coarser grind for lighter beans.
b