With Ground Coffee - SEVERIN KA4810 Mode D'emploi

Adjusting the grind
CAUTION!
Adjust the grind only while the appliance is grinding
the coffee beans otherwise the grinder may be
damaged.
TIP
A fi ne grind is recommended for a light roast and a
coarse grind for a dark roast. The roast is normally
printed on the coffee packaging.
1. Prepare coffee with coffee beans, ►"5.1 With coffee beans" on
page 26.
2. Wait until the appliance grinds the beans.
Fig. 2: Adjusting the grind
3. Set the grind regulator to the required grind.
11 12 13
Turn the regulator clockwise towards "–" to grind the coffee fi ner.
•
• Turn the regulator anticlockwise towards "+" to grind the coffee
coarser.

5.2 With ground coffee

1. Press the "OPEN" button on the side of the appliance to open the
10 11 12
swing-out fi lter
.
3 4 5
2. Place the fi lter insert in the swing-out fi lter
2 3 4
3. Place a disposable coffee fi lter in the fi lter insert
TIP
You can also use the permanent fi lter
a disposable coffee fi lter.
4. Add the ground coffee to the disposable coffee fi lter. Use the supplied
measuring scoop for this purpose. Refer to the following table for
5 6 7
the required amount:
Number
of cups
2
4
6
8
10
5. Fit the fi lter ring onto the fi lter insert
1
6. Close the swing-out fi lter
.
3 4 5
7. Remove the coffee jug.
TIP
Fill the coffee jug only up to the required number of
cups as all the water is used for brewing. One cup is
approx. 125 ml.
.
3 4 5
.
2 3 4
instead of
1 2 3
Number of scoops
1½ – 2
3 – 4
4½ – 6
6 – 8
8 – 10
.
2 3 4
GB
27