Buchi Rotavapor R-300 Manuel D'utilisation page 99

BÜCHI Labortechnik AG
Manuel d'utilisation Rotavapor® R-300
Glass assembly V. Vertical condenser, 1500 cm
P+G
For standard distillations, used with recirculating chiller
or tap water.
Features: Large cleaning hole on top (SVL22).
Connection for vapor temperature sensor. Inner glass
tube. Inner glass plate. Content: 1 L receiving flask (P
+G), required tubings, ball joint clamp, stopcock, fee-
ding tubing.
Not inclusive: Evaporating flask, vapor duct, vacuum
gasket, holder.
Glass assembly HP, Incl. condenser, supplemen-
tary set and holder
High performance condenser, 3000 cm², for faster pro-
cess, greater distillation rates and fewer emissions of
solvents, used with recirculating chiller or tap water.
Features: Large cleaning hole on top (SVL22).
Connection for vapor temperature sensor. Inner glass
tube. Inner glass plate. Contents: 1 L receiving flask,
required tubings, ball joint clamp, stopcock, feeding tu-
bing, holder.
Not included: Evaporating flask, vapor duct, vacuum
gasket. Compatible with Rotavapor® R-300, R-215 and
R-210.
Glass assembly HP, Incl. condenser P+G, sup-
plementary set and holder
High performance condenser, 3000 cm², P+G, for fas-
ter process, greater distillation rates and fewer emis-
sions of solvents, used with recirculating chiller or tap
water. Features: Large cleaning hole on top (SVL22).
Connection for vapor temperature sensor. Inner glass
tube. Inner glass plate. Contents: 1 L receiving flask (P
+G), required tubings, ball joint clamp, stopcock, fee-
ding tubing, holder.
Not included: Evaporating flask, vapor duct, vacuum
gasket. Compatible with Rotavapor® R-300, R-215 and
R-210.
Accessoires pour assemblages en verre
Condenser holder.For glass assembly V/HP/C/S/
CR/BY
Content: Holding rod, rubber band, cross sleve.
Condenser holder. For Glass assembly E
Content: Holding rod, bride, cross sleeve.
Réf. article
2
, 11062433
11066561
11066562
Réf. article
048180
048181
Annexe | 10
Schéma
Schéma
99/120