10Pièces D'usure - Buchi Rotavapor R-300 Manuel D'utilisation

10 | Annexe
10.2.10
106/120
Set Rotavapor® connection
Combining the Multivapor with the Rotavapor® re-
quires a T-shaped glass connector for the condenser of
the rotary evaporator. The T-piece consist of two sphe-
rical joints for the condenser assembly and a SVL 22
joint for the vacuum tube. The length of the tube is 400
mm.
Vacuum connection. Incl. drain valve, hose barb
Ø 8 mm, BJ35/20
Connection piece for aeration of the system, placed
between condenser and receiving flask.
Pièces d'usure
Joint
Vacuum seal VS26, PTFE base, NBR O-ring, FDA-complaint
Bagues d'étanchéité
For cap nut GL14 to FEP, EPDM
Set. 10pcs, for hose barbs GL14, EPDM, black
Set. 10pcs, for hose barbs GL14, FPM, green
Set. 20pcs, for hose barbs GL14, silicone, red
Raccords de tuyaux
Hose barb. Bent, GL14, incl. silicone seal
Hose barbs, set. 2 pcs, bent (1), straight (1),
GL14, silicone seal
Content: Hose barbs, cap nuts, seals
Hose barbs. set. 3 pcs, bent, GL14, silicone seal
Content: Hose barbs, seals.
Hose barbs, set. 4 pcs, bent GL14, silicone seal
Content: Hose barbs, cap nuts, seals
Hose barbs. set. 4 pcs, bent, GL14, EPDM seal
Content: Hose barbs, cap nuts, seals.
BÜCHI Labortechnik AG
Réf. article
048740
001006
Réf. article
11069167
Réf. article
038225
040029
040040
040023
Réf. article
018916
041939
041987
037287
043129
Manuel d'utilisation Rotavapor® R-300
Schéma
Schéma