Buchi Rotavapor R-300 Manuel D'utilisation page 110

10 | Annexe
110/120
Distribution head. For glass assembly S/CR/BY,
incl. cap nut GL10
Distribution head. For glass assembly E, incl. cap
nut GL10
Distribution head. For glass assembly E, P+G, in-
cl. cap nut GL10
Expansion vessel. For Glass assembly E, glass,
incl. screw cap GL14
Expansion vessel. For Apparatus E, glass, P+G,
inc. GL14 union nut
U-tube. For assembly E, Glass, incl. screw cap
GL14
U-tube. For assembly E, Glass, P+G incl. screw
cap GL14
Cold finger. For condenser C/CR
Vacuum connection. For glass assembly BY, va-
cuum piece
To close the top hole (NS29/32) of the condenser if no
expansion is used. Openings with screw cap SVL15
(on top) and with cap nut GL14 (sideward).
Vacuum connector. For glass assembly E, incl.
hose barb GL14
Bagues d'étanchéité
Gasket, For 1.5 L and 4 L beaker flask, Ø100 mm, incl. O-ring
PTFE coated gasket is used to seal the beaker flask.
For beaker flask 500 mL, Ø68 mm, incl. O-ring
PTFE coated seal for beaker flask.
BÜCHI Labortechnik AG
Réf. article
040657
040661
040663
001002
033507
001003
033508
000672
035026
001004
Réf. article
034152
034772
Manuel d'utilisation Rotavapor® R-300
Schéma