Buchi Rotavapor R-300 Manuel D'utilisation page 94

10 | Annexe
94/120
BUCHI Bluetooth® Dongle, connects instrument
to smartphone via Bluetooth®
Needed for firmware updates, eSupport or quoting
wear parts.
AutoDest sensor. Incl. cap nut, seal GL14
For automatic distillation. Measures temperature of co-
oling media and the vapor temperature. Vacuum is ad-
justed according to cooling capacity of condenser.
Meant to be used with the Interface I-300 / I-300 Pro
and glass assembly V, HP or S.
Condensate trap.
Condenser V and HP, grey, TPE, hose connector Ø8
mm. Collects and drains condensate which may accu-
mulate on the condenser.
Condensate trap.
Condenser V and HP, green, TPE, hose connector Ø8
mm. Collects and drains condensate which may accu-
mulate on the condenser.
Cooling water valve. 24VAC
Valve opens cooling water feed during distillation.
Meant to be used with a vacuum controller/interface.
Extraction thimbles, Set. 25 pcs, 43 x 118 mm,
cellulose
For Soxhlet extraction unit.
Flask holder. EPDM, slip free
Holder for round-bottom flasks (50-5000 mL).
Flask holders, set. 5 pcs., EPDM, slip free
Holder for round-bottom flasks (50-5000 mL).
Foam sensor. Incl. holder
Prevents sample from foaming into the condenser by
aeration of system temporarily. Meant to be used with
the Interface I-300 / I-300 Pro.
IQ/OQ. R-300 en
Official BUCHI documents.
Lab grease. Glisseal 40 (60 g)
To grease joints in order to increase tightness of sys-
tem.
Level sensor. Incl. O-ring, cable, rubber band
Prevents an overflow in the receiving flask of conden-
ser/secondary condenser. Placed on receiving flask.
Meant to be used with the Interface I-300 / I-300 Pro.
BÜCHI Labortechnik AG
Réf. article
11067770
11059225
11062955
11061985
031356
018106
048618
11059916
11061167
11063608
048197
11060954
Manuel d'utilisation Rotavapor® R-300
Schéma
Rotavapor ® R-300
Installation Qualification