Technical Data; Declaration Of Conformity; A Tool Mount - Schwamborn WDS 530 E Manuel D'utilisation Original

EN Wall, ceiling and floor grinding machine WDS 530 E

7 Technical data

7 Technical data
Designation
Hydraulic operating
pressure
Nominal output of the grin­
ding drive (hydraulic)
Tool mount
Tool speed
(ETX-carrier)
Dust extraction
Dimensions Height
Width
Length
Extension stoke
Working width
Contact pressure of the
grinding machine Ceiling
Floor
Weight without tool
Noise level
Value Unit
70 ... 120 bar
4 kW
ETX 1 / ETX 2
400 ... 1000 rpm
1 ... 4 x 70 mm
650 mm
640 mm
1386 (1636) mm
250 mm
530 mm
400 ... 1400 N
Wall 400 ... 2300 N
600 ... 2300 N
222 kg
84 dB(A)

8 Declaration of conformity

Schwamborn Gerätebau GmbH
Robert‐Bosch‐Straße 8
D‐73117 Wangen
Germany
We hereby declare that the grinding machine
WDS 530 E
complies with the provisions described in
— Directive 2006/42/EC
Machines
The following harmonised standards apply:
— EN 292‐1, EN 292‐2, EN 13857
Safety of Machinery
— EN 62079
Creating operating instructions
It is forbidden to begin operating a modified or retro­
fitted machine before it has been determined that the
modified or retrofitted machine conforms to the above
directives.
This declaration is no longer valid if the machine is
modified or retrofitted without our prior consent and
approval.
The original operating manual with the Declaration of
Conformity and translation into the respective Euro­
peannational language is supplied with the machine.
Wangen, 16.04.2021
Eckart Schwamborn
Managing Director
31