Operating - Schwamborn WDS 530 E Manuel D'utilisation Original

EN Wall, ceiling and floor grinding machine WDS 530 E

3 Operating

The safety equipment must be checked for
completeness and function before starting up!
The safety equipment must be in place during
operation!
The surfaces to be ground by the grinding ma­
chine must be free of obstacles and free of
loose objects, which could be flung out during
grinding.
The grinding machine must be switched off im­
mediately if heavy vibrations or unusual noises
occur during operation so that cause can be re­
moved.
Risk of injury from rotating grinding machine
parts!
Limbs and clothing can be drawn in!
Proceed with the greatest care and caution!
Any work required for the hydraulic system may
only be performed by technicians with the
requisite levels of qualification.
Risk of poisoning due to harmful substances at
the workplace!
Eating, drinking or smoking at the workplace is
prohibited! Always eat in break rooms or can­
teen areas!
After completing the work, thoroughly clean
yourself!
A general inspection of the machine must be
conducted before starting up the grinding
machine! Particular attention should be paid to
damaged or loose components, and wear!
The grinding machine may only be put into
operation if it is in perfect technical condition!
Adding to or modifying the grinding machine in
any way that could compromise operating safety
is prohibited!
Cleaning and maintenance may be done only by
trained personnel!
22
Maintenance must be conducted according to
the operation manual.
Do not operate the grinding machine in areas
where there is risk of explosion or where
flammable materials are present.
3 Operating
Risk of injury from parts flung out during
grinding!
Wear protective clothing and protective goggles!
Wear safety shoes!
Wear protective gloves!
Proceed with the greatest care and caution!
Danger of injury from loud noise during grinding
operation of the grinding machine!
Always wear hearing protection when the
grinding machine is in operation!
Risk of injury from dust formation during grind­
ing work!
Wear respiratory protection!
A suitable dust extraction unit has to be con­
nected to the grinding machine.
Risk of damage due to too high extraction ca­
pacity!
The manufacturer strongly recommends only
using dust extration units from the company
Schwamborn Gerätebau GmbH.