Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4
Adjust the height of the suspension hook as described
in the instructions for the standard harness. (Forestry
clearing)
5
If you need to lower the suspension hook, for trimming
for example, move the suspension strap (A) to the
lower mounting point on the backplate.
6
The elastic strap (B) can be tightened to transfer more
load from the shoulder straps to the hip strap.
B
Balance XT
(545FX, 545FXT, 545RXT)
ASSEMBLY
A
Safety release
Push down the red release lever to release the machine
from the harness.
Adjusting the harness
1
Adjust the harness to suit the person's height. Move
the shoulder strap attachment to a suitable hole in the
back plate by pressing in the spring-loaded lock and
twisting the shoulder strap attachment.
2
Tighten the hip strap so that it sits securely.
3
The hip belt should hang roughly in line with the hip
bone.
–
English
57
Publicité
Chapitres
Table des Matières
