Pioneer AVH-120BT Mode D'emploi page 17

[System Language]
Menu Item Description
[System Language] Select the system language.
NOTES
• If the embedded language and the selected language setting are
not the same, the text information may not display properly.
• Some characters may not be displayed properly.
[Restore Settings]
Menu Item Description
[Restore Settings] Touch [Restore] to restore the settings to the default
settings.
CAUTION
Do not turn off the engine while restoring the settings.
NOTES
• This setting is available only when you stop your vehicle in a safe
place and apply the parking brake.
• The source is turned off and the Bluetooth connection is
disconnected before the process starts.
[Beep Tone]
Menu Item Description
[Beep Tone] Select [Off] to disable the beep sound when the button is
[On] [Off] pressed or the screen is touched.
[Touch Panel Calibration]
If you feel that the touch panel keys on the screen deviate from the actual positions that
respond to your touch, adjust the response positions of the touch panel screen.
NOTES
• Do not use sharp pointed tools such as ballpoint or mechanical pens. They may damage the screen.
• Do not turn off the engine while saving the adjusted position data.
• This setting is available only when you stop your vehicle in a safe place and apply the parking brake.
Menu Item Description
1
[Touch Panel Calibration] Touch [Yes].
2
Touch four corners of the screen along the arrows.
3
Press
The adjustment results are saved.
4
Press
Proceed to 16-point adjustment.
5
Gently touch the center of the [+] mark displayed on
the screen.
The target indicates the order.
• When you press
position returns.
• When you press and hold
canceled.
6
Press and hold
The adjustment results are saved.
[Dimmer Settings]
Menu Item Description
[Dimmer Trigger] Setting the dimmer brightness.
[Auto] Switches the dimmer to on or off automatically according
to your vehicle's headlight turning on or off.
[Manual] Switches the dimmer to on or off manually.
[Time] Switches the dimmer to on or off at the time you adjusted.
[Day/Night] Setting the dimmer duration by day or night.
You can use this function when [Manual] is set to [Dimmer
Trigger].
[Day] Turns the dimmer function to off.
[Night] Turns the dimmer function to on.
.
once again.
, the previous adjustment
, the adjustment is
.
17
En