Basic Operation - Pioneer AVH-120BT Mode D'emploi

Microphone The Bluetooth microphone is built in the grill of the product. Speak toward the
microphone when you make a call.
NOTE
Depending on the usage condition of the vehicle such as the wind from the air
conditioner when using the hands-free function, it may be difficult for the
other party to hear your voice at their end.
(EJECT) Refer to Inserting and ejecting a disc (page 12).
Disc-loading slot
LCD screen

Basic operation

Resetting the microprocessor
CAUTION
• Pressing the RESET button resets settings and recorded contents to the factory settings.
– Do not perform this operation when a device is connected to this product.
– Some of the settings and recorded contents will not be reset.
• The microprocessor must be reset under the following conditions:
– Prior to using this product for the first time after installation.
– If this product fails to operate properly.
– If there appears to be problems with the operation of the system.
1
Turn the ignition switch OFF.
2
Press RESET with a pen tip or other pointed tools.
Settings and recorded contents are reset to the factory settings.
Remote control
The remote control is sold separately. For details concerning operations, see the remote
control manual.
Starting up the unit
1
Start the engine to boot up the system.
The [Select Program Language] screen appears.
NOTE
From the second time on, the screen shown will differ depending on the previous conditions.
6
En
2
Touch the language.
3
Touch .
The top menu screen appears.
Using the touch panel
You can operate this product by touching the keys on the screen directly with your
fingers.
NOTE
To protect the LCD screen from damage, be sure to touch the screen only with your finger gently.
Common touch panel keys
Switches between playback and pause.
Skips files/tracks/chapters forward or backward.
Performs fast reverse or fast forward.
Touch again to change the playback speed.
Stops playback.
Text When all characters are not displayed, the rests are automatically scrolled on
information the display. The characters are displayed by touching the text information.
NOTE
This function is available only when you stop your vehicle in a safe place and apply
the parking brake.
Returns to the previous screen.
Close the screen.