HBM SLS Guide Rapide page 16

Changing the unit (kg
1‐9 x
1 x
1 x
14
HBM Short Reference Guide Lifter Scale A1221-6.0 Issue Oct. 1, 2016
Lb)
"
Press once again to activate setting the filter setting
(Amplifier Filter).
"
Make the selection by repeatedly pressing the ON/
OFF key (the number flashes):
0 = Filtering switched off
1 = Weak filtering:
+ very fast weight display
- unsteady display when there are movements
4 = Medium filtering (recommended):
+ fast weight display
+ steady display
.
.
.
8 = Very strong filtering:
+ possible to weigh fidgety persons
- long waiting time before the scale weight or
zero point display is steady
"
Confirm your selection and adopt the settings by
pressing the G/N key.
At this point, you can check AF or change it again by pressing
ON/OFF once again.
"
Press the G/N key once to go back to weighing
mode.
You can now weigh.
SLS