Setting/Changing The Filter - HBM SLS Guide Rapide

1 x
1‐2 x
7.2

Setting/changing the filter

The SLS lifter scale has the option to filter the weight display by making rele­
vant settings.
2 x
SLS
HBM Short Reference Guide Lifter Scale A1221-6.0 Issue Oct. 1, 2016
Manual power off only (with the ON/OFF key)
Power off automatically after 30 seconds
(only when the scale is not loaded)
Power off automatically after 60 seconds
(only when the scale is not loaded)
Power off automatically after 5 minutes
(only when the scale is not loaded)
Power off automatically after 10 minutes
(only when the scale is not loaded)
"
Confirm your selection with the G/N key
At this point, you can check PO or change it again by pressing
ON/OFF once again.
"
Press the G/N key once
to go to filter setting AF
or
"
Press the G/N key twice
to go back to weighing mode
"
Switch the scale on and wait for X10 seconds
(see section 4.1).
Interactive mode (Standard_Function)
Changing the unit (kg
"
Simultaneously press the ON/
OFF and G/N keys to activate
interactive mode.
Lb)
13