Safety Information - Parkside PLSA 20-Li A1 Traduction Des Instructions D'origine

Safety information

WARNING!
► Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
The soldering station is suitable for indoor
use only.
This appliance may be used by
■
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks. Do not allow
children to use the appliance as a
toy. Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised.
ATTENTION!
► Observe the safety instructions given in the
operating manual of your Parkside X 20 V
Team series battery.
► The operating instructions are an integral part
of this appliance. They contain important
information about safety, usage and disposal.
Before using the appliance, please familiarise
yourself with all operating and safety instruc-
tions. Use this appliance only as described
and for the areas of applications specified.
Keep the operating instructions in a safe place
and hand over all documents when passing
the appliance on to any future owner.
PLSA 20-Li A1
Residual risks
■ RISK OF BURNS! Do not touch the heated
soldering tip or the molten solder. There is a risk
of being burnt. Always allow the appliance
to cool down completely before changing,
cleaning or checking components.
■ After work, allow the soldering iron to cool
down in the air only. Do not attempt to quench
it with water!
■ CAUTION! RISK OF FIRE! Always use the
special holder or another fireproof surface
when you put the soldering iron down.
■ During breaks from work, the soldering iron
must be placed into the holder.
■ Keep the appliance away from flammable
material.
■ Never leave a switched-on appliance unsuper-
vised.
■ CAUTION! RISK OF INJURY! Keep your hands
away from the heated workpiece. The heat can
be emitted through the workpiece.
■ Avoid contact between the hot soldering tip and
the plastic parts of the holder. Otherwise, the
appliance might be damaged.
■ In case of hazards, remove the battery from
the appliance immediately.
■ CAUTION! RISK OF POISONING! Do not
breathe in vapours.
■ During work over an extended period in which
hazardous vapours can be created, always
ensure sufficient ventilation of the workplace.
In addition, protective gloves, a face mask and
work apron are recommended.
■ Avoid eating, drinking and smoking in rooms
where soldering work is taking place. Other-
wise, lead residues on your hands might
contaminate the food, drink or cigarettes and
be absorbed into your body.
■ Always wash your hands thoroughly after
soldering.
■ Do not dispose of solder waste in normal house-
hold waste! Solder waste should be disposed
of with hazardous waste.
GB │ IE │
3 ■