Checking That The Running Direction Is Correct; Switching Between Roller Shutter / Screen Operation And Venetian Blind Operation - Becker Centronic VarioControl VC360-II Instructions De Montage Et D'utilisation

Checking that the running direction is
Changing direction of rotation via master transmitter
It is only possible to change the rotation direction within 15
minutes after switching on the power.
Press the UP or DOWN button
▻ The shading solution runs in the desired direction.
► The running direction is OK.
If the shading solution runs in the wrong direction, the running direction
must be changed. Proceed as follows:
Switching between roller shutter / screen
operation and venetian blind operation
Press the programming button for 3 seconds until the receiver confirms.
Then press the programming button and also the UP/STOP/DOWN buttons for
10 seconds until the receiver confirms.
The switching process is now complete.
correct
First press the programming button and, within
the next 3 seconds, press both the UP and DOWN
3x
buttons for 3 seconds.
► The receiver confirms.
Check the running direction again.
31 - en