Daily Use; Heating Functions - AEG BEB331010M Notice D'utilisation

Masquer les pouces Voir aussi pour BEB331010M:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5.1 Before first use
The oven can emit an odour and smoke during preheating. Make sure that the room is
ventilated.
Step 1
Set the clock
1.
,
- press to set the time.
After approximately 5 sec., the
flashing stops and the display
shows the time.
Turn off the oven and wait until it is cold. Place the accessories and the removable shelf supports in the oven.

6. DAILY USE

WARNING!
Refer to Safety chapters.
6.1 How to set: Heating function
Step 1
Turn the knob for the heating functions
to select a heating function.
Step 2
Turn the control knob to select the tem‐
perature.
Step 3
When the cooking ends, turn the knobs
to the off position to turn off the oven.

6.2 Heating functions

Heating func‐
Application
tion
The oven is off.
Off position
To turn on the lamp.
Light
Step 2
Clean the oven
1.
Remove all accessories and re‐
movable shelf supports from
the oven.
2.
Clean the oven and the acces‐
sories with a soft cloth, warm
water and a mild detergent.
Heating func‐
tion
True Fan Cooking
Pizza Function
Cooking / Aqua
Preheat the empty oven
1.
Set the maximum temperature
for the function:
Time: 1 h.
2.
Set the maximum temperature
for the function:
Time: 15 min.
Application
To bake on up to three shelf po‐
sitions at the same time and to
dry food.
Set the temperature 20 - 40 °C
lower than for Conventional
Cooking.
To bake pizza. To make inten‐
sive browning and a crispy bot‐
tom.
To bake and roast food on one
shelf position.
Refer to "Care and cleaning"
Conventional
chapter for more information
about: Aqua Cleaning.
Cleaning
To bake cakes with crispy bot‐
tom and to preserve food.
Bottom Heat
To defrost food (vegetables and
fruit). The defrosting time de‐
pends on the amount and size
Defrost
of the frozen food.
Step 3
.
.
ENGLISH
37

Publicité

Table des Matières
loading

Table des Matières