ECOFOREST IBIZA Manuel D'installation Et Maintenance page 40

drawing 16). To better access the supply air duct system, we recommend removing the top grid (fastened with 4
screws, one at each corner.
With the Kiev model, it is possible to customize the stove's convection air outlets. On each side of the stove,

there is a rod ( ) that, depending on its position, forces the stove to blow hot air out through the front (rod placed
backwards, drawing 17), through the back air duct (rod placed forward, drawing 18) or through both (rod in an
intermediate position, drawing 19). The latter option requires the user to use a clamp (
intermediate position.
Drawing 17
The maximum length for all pipes channeling air is of 14 meters. If the user needs longer pipes, he/she must
install an additional ventilation motor (see the diagram detailing the different parts.
Inside the hearth of the Ecoforest stove you will find a box containing: The user, installation and maintenance
manuals, power cord, room sensor, cleaning brush, wifi antenna, antenna's magnetic base, keyboard and keyboard
support (Dubai and Kiev).
With the stove unplugged, we must locate the keyboard cable. In the Dubai and Kiev stoves, the cable is
located on the backside and it will be mounted on the supplied stand with magnetic base.
For the insert models one must look for the cable in the room thermostat and wiring casing. The cable will be
threaded.
In the remaining models, the keyboard will be mounted on the stove.
Drawing 16
Drawing 18
OSLO MODEL.
POWER CABLE AND ROOM THERMOSTAT.
KEYBOARD CONNECTION.
39

) that keeps the rod in its
Drawing 19