Publicité
Les langues disponibles
Les langues disponibles
Attachment stove-top wall.
Attachment stove- lower wall.
In order to fix the stove in its right position and prevent it from accidentally moving, its legs must be set to
the right height until the front wheels lose contact with the rail. In order to do that, we have to disassemble
the frame's side fittings, open the door of the fireplace, unscrew the bottom trim and pull it out. Do this for
stove models Kiev Insert (drawing 11) and Oslo Insert.
Frame mountings.
Bottom trim.
Leveled legs.
Although we cannot keep track of or describe every single installation, option, or the local installation
regulations corresponding to your area, Ecoforest guarantees that the installations suggested below will enable
your stove to function properly, and to conform to minimum personal and material safety measures.
If you are installing your stove in a building, in addition to respect local regulations on gas flues, you should
consult with the residents' association to avoid future problems.
Please read the entire manual carefully, especially the chapter on installation to ensure your stove
operates properly and at full power.
4.25. The installation shown below is the most common. Please bear in mind that if the gas flue pipe located on
the outside of the dwelling is in an area where people pass by, insulated tube must be used.
EXAMPLES OF FLUE INSTALLATIONS.
36
Drawing 10
Drawing 11
Publicité
