Functional Description - Milwaukee M12 Manuel De L'utilisateur

Masquer les pouces Voir aussi pour M12:

Notice originale (338 pages)

Manuel de l'utilisateur (25 pages)

Mode d'emploi (2 pages)

Table Des Matières

Table des Matières

Les langues disponibles

cidentally occurs, flush with water. If liquid con-

tacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

• Do not use a battery pack or tool that is damaged or

modified. Damaged or modified batteries may exhibit

unpredictable behavior resulting in fire, explosion or

risk of injury.

• Do not expose a battery pack or tool to fire or ex-

cessive temperature. Exposure to fire or temperature

above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging im-

properly or at temperatures outside the specified range

may damage the battery and increase the risk of fire.

SERVICE

• Have your power tool serviced by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

• Never service damaged battery packs. Service of

battery packs should only be performed by the manu-

facturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

DRAIN SNAKE

• Only grasp the rotating cable with gloves recom-

mended by the manufacturer. Latex or loose fitting

gloves or rags can become wrapped around the cable

and may result in serious personal injury.

• Do not allow the cutter to stop turning while the

cable is turning. This can overstress the cable and

may cause twisting, kinking or breaking of the cable

and may result in serious personal injury.

•One person must control both the cable and the

switch. If the cutter stops rotating, the operator must

be able to turn the tool off to prevent the cable from

twisting, kinking and breaking.

• Use latex or rubber gloves inside the gloves rec-

ommended by the manufacturer, goggles, face

shields, protective clothing, and respirator when

chemicals, bacteria or other toxic or infectious

substances are suspected to be in a drain line.

Drains may contain chemicals, bacteria and other

substances that may cause burns, be toxic or infec-

tious or may result in other serious personal injury.

• Practice good hygiene. Do not eat or smoke while

handling or operating the tool. After handling or

operating drain cleaning equipment, use hot, soapy

water to wash hands and other body parts exposed

to drain contents. This will help reduce the risk of health

hazards due to exposure to toxic or infectious material.

• Only use the drain cleaner for the recommended

drain sizes. Using the wrong size drain cleaner can

lead to twisting, kinking or breaking of the cable and

may result in personal injury.

• Inspect cable for wear and damage before use.

Replace a worn or damaged cable before using the

drain cleaner.

• Do not twist, kink or over bend cables. Breaking of

the cable may result in serious personal injury.

• Inspect the drain to be cleaned before use. If pos-

sible, determine the access point(s) to the drain, the

size(s) and length(s) of the drain, distance to mainlines,

the nature of the blockage, presence of drain clean-

ing chemicals or other chemicals, etc. If chemicals

are present in the drain, it is important to understand

the specific safety measures required to work around

those chemicals. Contact the chemical manufacturer

for required information.

• If needed, place protective covers in the work area.

The drain cleaning process can be messy.

• Make sure cable is fully retracted inside of the drain

cleaner. This will prevent whipping at start up.

• Place the drain cleaner at a distance no greater

than six inches from drain opening. If the drain

cleaner cannot be placed within six inches from

the drain opening, the drain opening will need to

be extended using a similar size pipe and fittings.

Greater distances can cause control problems leading

to twisting, kinking, breaking or whipping of the cable.

• Do not operate the drain cleaner in reverse rotation

except as described in this manual. Running the tool

in reverse for extended periods can cause damage to

the cable and accessories.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry im-

portant information. If unreadable or missing, contact

a MILWAUKEE service facility for a free replacement.

•

Some dust created by power sanding,

WARNING

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

filter out microscopic particles.