Hitachi WH 14DSL Mode D'emploi page 9

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
11. If there is battery leakage, foul odor, heat
generated, discolored or deformed, or in any way
appears abnormal during use, recharging or
storage, immediately remove it from the
equipment or battery charger, and stop use.
CAUTION
1.
If liquid leaking from the battery gets into your
eyes, do not rub your eyes and wash them well
with fresh clean water such as tap water and
contact a doctor immediately.
If left untreated, the liquid may cause eye-
problems.
2.
If liquid leaks onto your skin or clothes, wash well
with clean water such as tap water immediately.
There is a possibility that this can cause skin
irritation.
SPECIFICATIONS
POWER TOOL
Model
Power mode
No-load speed
Save mode
Small screw
Capacity
Ordinary bolt
High tension bolt
Tightening torque
Rechargeable battery
Weight
Model
Power mode
No-load speed
Save mode
Small screw
Capacity
Ordinary bolt
High tension bolt
Tightening torque
Rechargeable battery
Weight
3.
WARNING
If an electrically conductive foreign object enters the
terminals of the lithium ion battery, a short-circuit may
occur resulting in the risk of fire. Please observe the
following matters when storing the battery.
M4 – M8
M5 – M14
M5 – M12
Power mode
Maximum 145 N·m (1480 kgf·cm)
Save mode
Maximum 80 N·m (820 kgf·cm)
Tightening is M14 high tension
bolt (strength grade 12.9), when
fully charged at 20°C temp.
Tightening time: 3 sec.
BSL1430: Li-ion 14.4 V (3.0 Ah 8 cells)
1.4 kg
Power mode
Maximum 145 N·m (1480 kgf·cm)
Save mode
Maximum 80 N·m (820 kgf·cm)
Tightening is M14 high tension bolt (strength grade 12.9), when fully
charged at 20°C temp.
Tightening time: 3 sec.
BSL1830: Li-ion 18 V (3.0 Ah 10 cells)
If you find rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using
the battery for the first time, do not use and return
it to your supplier or vendor.
Do not place electrically conductive cuttings, nails,
steel wire, copper wire or other wire in the storage
case.
Either install the battery in the power tool or
store by securely pressing into the battery cover
until the ventilation holes are concealed to prevent
short-circuits (See Fig. 1).
WH14DSL
–1
0 – 2600 min
0 – 2000 min
–1
Power mode
Maximum 140 N·m (1430 kgf·cm)
Save mode
Maximum 80 N·m (820 kgf·cm)
Tightening is M14 high tension
bolt (strength grade 12.9), when
fully charged at 20°C temp.
Tightening time: 3 sec.
BSL1415: Li-ion 14.4 V (1.5 Ah 4 cells)
WH18DSL
–1
0 – 2600 min
0 – 2000 min
–1
M4 – M8
M6 – M14
M6 – M12
1.6 kg
English
M4 – M8
M5 – M14
M5 – M12
1.2 kg
8

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wh 18dslWr 14dslWp 14dsl

Table des Matières