Daily Use - AEG GS45AVB Notice D'utilisation

7.2 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
You can set the released quantity of rinse
aid between level 1 (minimum quantity)
and level 6 (maximum quantity). Level 0
will deactivate the rinse aid dispenser
and no rinse aid will be released.
Factory setting: level 4.
How to fill the rinse aid
dispenser

8. DAILY USE

1. Open the water tap.
2. Press the on/off button to activate
the appliance.
Make sure that the appliance is in user
mode.
• If the salt indicator is on, fill the
salt container.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree
of soil.
Water and salt can come out
from the salt container when
you fill it. Risk of corrosion.
To prevent it, after you fill
the salt container, start a
programme.
B
A
A
+
1. Press the release button (D) to open
2. Fill the dispenser (A) until the rinse
3. Remove the spilled rinse aid with an
4. Close the lid. Make sure that the
E
-
C
D
CAUTION!
Only use rinse aid
specifically designed for
dishwashers.
the lid (C).
aid reaches the marking ''MAX''.
absorbent cloth to prevent too much
foam.
release button locks into position.
Fill the rinse aid dispenser
when the indicator (E)
becomes clear.
You can turn the selector of
the released quantity (B)
between position 1 (lowest
quantity) and position 4 or 6
(highest quantity).
ENGLISH 63