Installation Onto The Pipe; Recommandations For Installing The S020 Fitting On The Pipe - Burkert S020 Manuel D'utilisation

P (bar)
16
15
Metal
14
(PN16)
13
12
PVDF
11
10
9
8
PVC + PP
7
6
5
4
PVC (PN10)
3
2
PP (PN10)
1
0
-20 0 +20 +40 +60 +80 +100 +120
Except DN100 for measuring devices with clamp connection
1)
Fig. 5: Fluid pressure / temperature dependency curves for T
fittings used on their own
30
DN100 for measuring
1)
devices with clamp connection
(PN10)
PVDF (PN10)
+150
English
7.2.

installation onto the pipe

7.2.1. recommandations for installing the
S020 fitting on the pipe
→
To measure the pH or the oxidation reduction potential, install
a U-shaped bypass in order to prevent the electrode drying out
and to allow calibration without stopping the process.
T (°C)
Fig. 6: Bypass installation of the fitting
→
For measuring the flow and depending on the design of the
pipes, respect the minimum distances in accordance with the
standard EN ISO 5167-1, from which the diagrams in Fig. 7 are
excerpted.
Type S020
Installationandcommissioning