Choosing The Type Of Gas (4-Burner Version) - BORETTI BTG-80 Notice D'emploi

Choosing the type of gas (4-burner version)

The hob can be configured for use with natural gas or LPG. To activate the gas selection proce-
dure the hob must be switched on with all of the burners off.
Press the "+" and "-" buttons simultaneously for approx. 3 seconds as shown in the figure above.
The burner level display will switch off and "Met" or "LPG" will appear on the timer display, depen-
ding on the current configuration..
Select the desired setting using the "+" and "-" buttons.
To end the procedure, press the timer button.
By activating this function, any other previously set burner switch off times will be cancelled.
NL
FR
D
EN
77