2.4 Maintenance; Symbol - GreenWorks LME470 Manuel Opérateur

EN
• whenever you leave the
machine;
• before clearing blockages or
unclogging chute;
• before checking, cleaning or
working on the machine;
• after striking a foreign
object. Inspect the machine
for damage and make repairs
before restarting and
operating the machine;
• if the machine starts to
vibrate abnormally (check
immediately);
• inspect for damage;
• replace or repair any
damaged parts;
• check for and tighten any
loose parts.

2.4 MAINTENANCE

• Keep all nuts, bolts and screws
tight to be sure the machine is
in safe working condition.
• Check the grass collector
frequently for wear or
deterioration.
• On machines with multi blade,
take care as rotating one blade
can cause other blades to
rotate.
English
• Be careful during adjustment
of the machine to prevent
entrapment of the fingers
between moving blades and
fixed parts of the machine.
• Always allow the machine to
cool down before storing.
• When servicing the blades be
aware that, even though the
power source is switched off,
the blades can still be moved.
• Replace worn or damaged
parts for safety. Use only
genuine replacement parts and
accessories.
3

SYMBOL

Some of the following symbols may be used on this product.
Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the
product better and safer.
Symbol
6
Explanation
Read operator's manual.
Keep bystanders away.
Do not expose machine to rain or wet
conditions.
Beware of sharp blades. Blades con-
tinue to rotate after the motor is
switched off. Remove disabling de-
vice before maintenance.