Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

damaged. Replace worn or
damaged components in sets to
preserve balance. Replace
damaged or unreadable labels.

2.3 OPERATION

• Use the machine only in
daylight or good artificial
light.
• Avoid operating the machine
in wet grass.
• Always be sure of your footing
on slopes.
• Walk, never run.
• Work across the face of slopes,
never up and down.
• Exercise extreme caution when
changing direction on slopes.
• Do not work excessively steep
slopes.
• Use extreme caution when
reversing or pulling the
machine towards you.
• Stop the blade(s) if the
machine has to be tilted for
transportation when crossing
surfaces other than grass, and
when transporting the machine
to and from the area to be
used.
English
• Never operate the machine
with damaged guards or
shields or without guards or
shields in place.
• Switch on the motor carefully
according to instructions and
with feet well away from the
blade(s).
• Do not tilt the machine when
switching on the motor, except
if the machine has to be tilted
for starting. In this case, do not
tilt it more than absolutely
necessary and lift only the
part, which is away from the
operator.
• Do not start the machine when
standing in front of the
discharge opening.
• Do not put hands or feet near
or under rotating parts. Keep
clear of the discharge opening
at all times.
• Do not transport the machine
while the power source is
running.
• Stop the machine, remove the
disabling device and battery
pack. Make sure that all
moving parts have come to a
complete stop
5
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

G24x2lm46s

Table des Matières