Monogram ZGG420NB Instructions D'installation page 16

Installation
Instructions
Double Access
Double Access
• Cut the opening to the dimensions shown. Reinforce
the inside of the opening using at least 1" wide
material surround to accept the frame-mounting
screws.
• Place the frame into the opening and secure with
screws (provided) on all sides as shown.
• Hang the doors on the hinges as shown.
NOTE: If you are installing another accessory into
the same enclosure, measure and cut the openings
to accommodate the bottom overlaps and align
them evenly across the bottom.
16
24-1/8"
24-1/8"
18-1/4"
Doors
Doors
ZX27AD ACCESS DOORS
18-1/4"
7/8"
Overlap
31-11026