Monogram ZGG420NB Instructions D'installation page 15

INSTALL BRACKET WITH TRANSFORMER (Built-In Models Only)
• Mount the bracket to the back wall of the
enclosure with 4 screws (not supplied).
• Slide the battery compartment from the top,
straight down, engaging the side slots.
Bracket
31-11026
Installation Instructions
Battery/Fuse
Compartment
Side Slots
NOTE: All connectors are polarized to connect correctly.
• Join transformer connectors.
• Join battery connectors.
• Route the power cord through the enclosure to the
electrical outlet.
Transformer
Connectors
Battery
Connectors
Power
Cord
15