Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
TECHNICAL DATA
Rated voltage..............................120V~60Hz
Rated power......................................18V
Rated no-load speed....................8000 RPM
Cutting diameter........................................12"
Line diameter.......................................0.065"
Line length.......................................1*10'(3m)
Tool weight.......................................5.513 lbs
Normal charging time................................1hr
Battery capacity..............................1500mAh
COMPONENT LIST
12
11
10
1.Switch lock off button
2.Battery release button
3.Battery pack
4.On/off switch
5.Head rotation locking mechanism
6.Height adjustment locking mechanism
7.Flattening head adjustment button
8.Safety guard
9.Cutting head assembly
10.Edge guide
11.Motor housing
12.Auxiliary handle
13.Cutting head cover
A
14.Cap release latch
15.Spool
16.Eyelet
17.Cutting head
18.Line feed button (See Fig J)
19.Charger(See Fig B )
14
1
2
3
4
5
6
7
8
9
20.Charged indicator light(Green) (See Fig B )
21.Charging indicator light(Red) (See Fig B )
ACCESSORIES
Guard
Charger
Cutting line
Auxiliary handle
Battery pack x2
We recommend that you purchase your
accessories from the same store that sold you
the tool. Use good quality accessories marked
with a well-known brand name. Choose the
type according to the work you intend to
undertake. Refer to the accessory packaging
for further details. Store personnel can assist
you and offer advice.
ASSEMBLY INSTRUCTIONS
Note: This may already be pre-fitted to the
trimmer. However the following instructions
give full assembly details.
1. Assembly of the Safety Guard (See A)
Fix the safety guard to the trimmer head
making sure the sides are located into the
grooves on the trimmer head.
Secure the safety guard onto the trimmer head
with the screw provided (on the inside of the
guard).
Fig A
Publicité
Table des Matières
