Proper Use; Technical Data - EINHELL GE-LC 18 Li T Instructions D'origine

•
Chain saw mounting kit
•
Cutter bar
•
Saw chain
•
Cutter guard
•
Battery pack (not included in delivery with
Art. No. 34.108.00, 34.108.10)
•
Charging unit (not included in delivery with
Art. No. 34.108.00, 34.108.10 )
•
Original operating instructions
•
Safety instructions

3. Proper use

Pole-mounted pruner (chainsaw with
telescopic handle)
The chain saw mounting kit is allowed to be used
only on the supplied motor head.
The chainsaw with telescopic handle is designed
for lopping off tree branches. It is not suitable for
extensive sawing work, felling trees or sawing any
materials other than wood.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Cutter bar length: ................................... 200 mm
Max. cutting length: ................................ 170 mm
Chain pitch: .................................... 3/8", 33 teeth
Chain thickness: ......................... (0.050") 1.3 mm
Sprocket wheel: ............................... 6 teeth, 3/8"
Cutting speed
at rated rpm: ...........................................3.76 m/s
Oil tank capacity: .................................... 125 cm
Net weight without accessories: .................3.4 kg
Saw chain: ...............................Oregon 91P033X
Cutter bar: ........ Oregon 080NDEA041 (520089)
Protection class: ................................................III
Anl_GE_LC_18_Li_T_SPK9.indb 23 Anl_GE_LC_18_Li_T_SPK9.indb 23
GB
Lithium-ion battery
Voltage: .................................................. 18 V DC
Capacity: ................................................... 3.0 Ah
Charging time: ............................................. 1.0 h
Charging unit
Input voltage: .....................200-250 V ~ 50-60 Hz
Power rating: .............................................. 72 W
Output voltage: ....................................... 20 V DC
Output current: ............................................... 3 A
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with ISO 22868.
L sound pressure level ................... 81.05 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
LWA sound power level measured .. 98.23 dB(A)
K uncertainty ............................................. 3 dB
WA
LWA sound power level guaranteed ... 102 dB(A)
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with ISO 22867.
Handle under load
Vibration emission value a
K uncertainty = 1.5 m/s
The quoted total vibration value and the quoted
noise emission values were measured in ac-
cordance with standardized test procedures and
can be used to compare one electric tool with
another. They can also be used for a provisional
assessment of the level of exposure.
Warning!
The vibration and noise emission levels during
actual use may vary from the values quoted,
depending on the way in which the electric tool is
used and, in particular, on the type of workpiece
being processed.
3
For the operator's protection it is essential to spe-
cify safety measures based on an estimate of the
exposure to vibrations during the actual condi-
tions of use (all stages of the operating cycle must
be considered in this connection, e.g. times in
which the electric tool is OFF and times in which
- 23 -
= 0.947 m/s
2
h
2
27.10.2020 10:20:11 27.10.2020 10:20:11