Publicité
INSTALLATION GUIDES
EN
MAINTENANCE
Replacing the cabling plate
Maintenance can be carried out on the
light fixture while it is still installed on the
support. Open the luminaire, this way the
disconnect switch will remove voltage to
the electrical auxiliaries automatically.
To remove the cabling plate, simply
disconnect the power cables, unscrew the
quick-release grub screws (Fig. 23) and
remove the module (Fig. 25).
Replacing the power supply
The power supply can also be removed by
disconnecting the power cables (Fig. 13)
and the connector from the PCB (Fig. 26).
Loosen the fixing screws and remove the
cabling plate, sliding it out (Fig. 27).
PHOTOBIOLOGICAL RISK
The luminaire should be positioned so
that prolonged staring into the luminaire
at a distance closer than 3.18m [10.4ft].
·
18
Neri Spa
Guida all'installazione · Installation guides · Guide d'installation · Installationsanleitung · Guía de instalación
Publicité
