Pioneer PDP-5050HD Mode D'emploi page 17

Preparation
3. Remove the shock absorbing pads.
Shock absorbing pad
Keep the shock absorbing pads and screws. They are required
when you place the Media Receiver in the horizontal position.
4. Plug the screw holes using the supplied caps.
Remove the separation sheet.
Align with the
hole and attach.
Screw hole cap
• When you have installed the Media Receiver vertically,
be sure to use the supplied stand. If you place the unit
directly on the floor, the cooling vents will be blocked,
resulting in mechanical failure.
06
17
En