The Touch Wheel; Touch Wheel Scaling - Harvia SENTIO Just Sauna Fin Instructions D'installation Et Mode D'emploi

Instructions for use for the user

9.3. The touch wheel

The touch wheel
perature and for humidity.
● If you wish to increase the preset value, swipe your finger clockwise over the
touch wheel.
● If you wish to decrease the preset value, swipe your finger anti-clockwise
over the touch wheel.
The preset values which you have set are indicated by the number of LEDs which
light up on the LED wheel
In two-sensor mode (with bench sensor, F2), in addition to the preset values,
values measured in the sauna room (actual values) are displayed. Different
colours are used to distinguish preset and actual values:
Preset values
Actual values

9.4. Touch wheel scaling

The preset temperature can be set to be-
tween 55 °C and 110 °C.
The preset or actual temperatures are indi-
cated by the number of LEDs which light up
on the temperature LED wheel
LEDs light up, the higher the temperature
is. An additional LED is equivalent to an
increase in temperature of 5 °C.
After setting the preset temperature, this
LED remains active. This LED goes out
when the preset temperature has been
reached (exception: single-sensor mode).
can be used to set preset values for the sauna room tem-
b
.
c
JUST-105D-FI
(black operating unit)
white
blue
. The more
c
JUST-105W-FI
(white operating unit)
red
blue
Temperature
Number of
LEDs lit
1
2
3
4
5
6
7
8
9
10
11
12
p. 28/40
°C
≤ 55
60
65
70
75
80
85
90
95
100
105
110