Assembly; Safety Instructions For Assembly; General Safety Instructions; Assembly Instructions - zarges ZAP Safemaster Plus S Notice De Montage Et D'utilisation

3.4.2 Permissible load
The following limit values apply to all products:

4. Assembly

4.1 Safety instruc- • Observe the safety instructions in
tions for
• The order for assembly as shown in the illustrations must be observed.
assembly
4.2 Assembly The assembly instructions are in the form of diagrams.
instructions

4.3 Final steps

After assembling the product, check the following:

5. Use

5.1 Safety instruc- Observe the safety instructions in
tions on use
W
D
Follow these basic rules to prevent dangerous situations arising:
W
D
Follow these basic rules to prevent dangerous situations arising:
Permissible load (incl. persons and weight of material)
Permissible load per rung
Total permissible load
1-4
See illustrations section of this manual.
> Have all parts included in the scope of delivery been fitted?
> Have all screwed connections been tightened?
ARNING
ANGER TO LIFE AND LIMB CAUSED BY FALLING FROM THE PRODUCT
> Never brace your full weight against the guardrails.
> Do not climb on the guardrails. Do not climb on the outside of the product.
> Do not jump on the treads or the platform.
> Do not use the product if it is soiled with substances which might cause you to
slip (oil, grease etc.).
ARNING
ANGER TO LIFE AND LIMB IF THE PRODUCT TOPPLES OVER OR COLLAPSES
> Always use the ladder elements to climb onto the product.
> Do not exceed the maximum permissible load.
> The product must not be used by more than one person at a time.
> Do not increase the platform height by using ladders, boxes or other devices.
> Do not subject the equipment to one-sided loads. Always distribute loads
evenly on the platform.
150 kg
150 kg

2.3 General safety instructions

2.3 General safety instructions
.
.
!
19