Left And Right Arm Mounting - Cassese CS969 Manuel D'utilisation

USER MANUAL

LEFT AND RIGHT ARM MOUNTING

5-mm Allen key
4-mm Allen key
Open-end spanner 10
Left table side
Release the left
spring clips, SG.
Figure 6-2
Open the main case
to its highest
position.
Figure 6-4
Do not untighten screws of the moulding guide (factory setting)
Left table side
Remove screws A
and B on the left
side of the machine
frame with a 5-mm
Allen key.
A
Figure 6-6
SG
Release the right
spring clips, SD
Remove screws C
and D on the right
side of the machine
frame with a 5-mm
Allen key.
B
Right table side
Figure 6-3
Moulding guide
Figure 6-5
Right table side
Figure 6-7
CS969
SD
D
C
22