Setting Up The Machine - Cassese CS969 Manuel D'utilisation

USER MANUAL

6 / SETTING UP THE MACHINE

There must be sufficient clearance around the machine to allow free
movement and access for maintenance.
The CS969 saw must be placed on a stable and generally flat floor.
Floor must be able to support load of 1250 Kg/m² and 315 Kg for
each foot.
Before making any electrical or pneumatic connections, level the
machine by means of the adjustable feet.
Use a 24-mm open-end spanner for locking nut (CE) and a 12-mm open-end spanner
for base (B).
Tighten locking nut (CE) firmly after adjustment and levelling.
As the work surface is 900 mm from the floor, it may be necessary to install a platform
for operators of short stature.
Sufficient space must be reserved around the machine to ensure a freedom of
movement and good acces for maintenance (see next page)
Open-end spanner 12
Open-end spanner 24
When installing the machine, make sure the floor is leveled and can support the weight of the machine.
The machine must be installed in a dry and temperate place. Choose a location where light will be sufficient to
ensure a comfortable use of equipment.
CE
Figure 6-1
CS969
B
20