Connecting To A Power Source; Using The Blower - Toro QuieTech 51566 Mode D'emploi

Converting from Vacuum
to Blower
1.
2.
3.
4.
Important: The blower will not run unless the bottom
inlet cover is turned clockwise as far as possible,
locking it in place (step 4).
5.
5
Operation
Connecting to a Power
Source
Use only an extension cord recommended for outdoor
use.
If you do not fully seat the extension cord on
the inlet plug, the loose plug could lead to
overheating and cause a fire, possibly
burning you or others.
Ensure that you fully seat the cord on the
plug and use the cord lock feature to secure
the cord.
Important: Check the power cord frequently during
use for holes in the insulation. Do not use a damaged
cord. Do not run the cord through water or wet grass.
Starting/Stopping
m–4609

Using the Blower

The blower is intended for residential use only. Use
the blower outdoors to move debris as needed.
3323–607