Setting Broil And Convection Broil - Thermador Professional PRO-GRAND PD30 Manuel D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour Professional PRO-GRAND PD30:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Section Five: USING THE OVEN
BROIL
Only the upper electric element heats in the BROIL
mode. Successful broiling requires constant
exposure to high, intense heat.
To Set the Oven to Broil or Convection Broil
Oven Heating Light
This light turns on when the oven heats and cycles
off when the set temperature has been reached. The
cycling continues as long as a BROIL mode is set.
Setting Broil/Convection Broil
1. Place oven rack in desired position.
2. Set Selector Switch to BROIL.
3. Set Oven Control Knob to BROIL setting.
4. The temperature indicator will rotate to broil after five
minutes.
5. Place food in oven at desired rack position as referenced
on Page 30.
6. The door should be closed throughout the broil cycle.
▲ Your Professional
broil pan. The slotted grid allows drippings to flow into the
lower pan, away from the intense heat of the broil burners,
minimizing spattering and smoking.
▲ The 48" Models have a small two-piece aluminum broiler
pan. It is to be used in the secondary oven.
®
Range comes with a large two-piece
Cooling Blower
The cooling blower turns on as soon as the broiler
turns on and remains on until the broiler is turned off
and the temperature inside the oven drops to 325
29
°
F.

Publicité

Chapitres

Table des Matières
loading

Table des Matières