JVC KD-ADV49 Manuel D'instructions page 34

4
Select the method to make a call.
Dial Menu
Redial
Received Calls
Phonebook
Preset Calls
Phone Number
09845671234
*1
Redial
Shows the list of phone numbers you have dialed.
= Go to the following step.
*1
Received Calls
Shows the list of the received calls. = Go to the
following step.
*2
Phonebook
Shows the phone book copied from a cellular
phone. = Go to the following step.
*3
Preset Calls
Shows the list of preset numbers. = Go to the
following step.
Phone Number
Shows the phone number entry screen. = "How
to enter a phone number" ☞ page 35
Voice Dialling
(Only when the connected cellular phone has the
voice recognition system):
Speak the name you want to call. (Refer to the
instruction manual supplied with your cellular
phone.)
5
Select the name/phone number/preset number
you want to call.
Redial
Delete
08945671234
12312341234
Dial
Store
• When the sound is stopped or interrupted during the
use of a Bluetooth device, turn off, then turn on the
unit.
– If the sound is not yet restored, connect the device
again. (☞ "Connecting/disconnecting a registered
device" on page 32)
• While talking, you can enter
the built-in microphone volume level by touching
MENU. (☞ page 60)
<MIC Setting> to adjust
34
*1
Displays only when the dialed or received number is
made through the unit.
For copying, ☞ page 35.
*2
For presetting, ☞ page 36.
*3
You can also enter <Dial Menu>
on the remote controller then touching 6 on the
unit.
When a call comes in...
Name and phone number
(if acquired)
The source is automatically changed to "Bluetooth."
When <Auto Answer> is activated...
The unit answers the incoming calls automatically.
(☞ page 60)
• When <Auto Answer> is deactivated, press SRC
or touch any control to answer the incoming call.
To end the call or reject an incoming call
Hold SRC or any control.
Answering a waiting call
If your cellular phone is equipped with the call
waiting function, you can put the current call on
hold and answer the waiting call.
Press SRC or touch any control.
• To restore the on-hold call, press SRC or touch any
control again.
• When you end one call, you can connect to the
other.
When a Text message comes in...
If the cellular phone is compatible with Text
message and <SMS Notify> is set to <On> (☞
page 60), the unit rings and "Receiving Message"
appears on the monitor to inform you of the arrival
of the message.
by pressing